- Home
- ยป
- Our Products
- »
- Pipe Bending Machines
Pipe Bending Machines
Semi Automatic NC Hydraulic Base Pipe Bending Machine
Product Brochure
Usage/Application | Industrial |
Brand | Thorson |
Voltage | 415 V |
Automation Grade | Automatic |
Frequency | 50 Hz |
Power Source | Hydraulic |
Phase | 3 Phase |
Pipe Bending By | Hydraulic Cylinder |
Structure Material | Mild Steel |
Maximum Bending Angle | 180 Degree |
Bend Direction | Clockwise |
Pipe Material | M.S, SS, Cu, Al. & Brass |
Pipe Thickness | 6 mm |
Bending Radius | 300 mm |
Pipe Size | 4 inch |
Simple, powerful and offering impressive bending quality, our semi-autometic machines for small and medium production runs allow bending without any limitations. Upgradable to match your requirements precisely
Features:
- Angle accuracy through encoding system
- Pipe clampping through collate mechanism
- Pipe rotating indexing unit
- Pipe linear motion through liner guide arrangement
- Save up to 15 Program with 8 Bend / Program
Applications:
- Thorson Industries introduces series of Light Duty
- Heavy Duty mechanically operated tube bending machines for various applications like furniture
- Two wheeler accessories
- Decorative items
- Automotive Seat Frames
- Crash Guards
- Hydraulic piping
- Chemical and Process Tubes & Heat Exchanger Concentric Tubes
Benifits:
- High Accuracy
- Heavy Structure
- PLC Programming
- Fully Hydraulic
- Extream Power
- Better Finishing
- Fully Designed
3 Axis CNC Hydraulic Base Pipe Bending Machine
Product Brochure
Automation Grade | Semi-automatic |
Voltage | 415 V |
Material | Mild Steel |
Model | CNC PBM |
Layout | Horizontal |
Phase | Three Phase |
Control Panel | PLC with 7" HMI Touch Screen System |
Pipe Material | M.S, SS, Cu, Al. & Brass |
Pipe Size | 3 inch |
Brand | Thorson |
Pipe Bending By | Servo Motor |
Bend Direction | Clockwise |
Bending Radius | 300 mm |
Pipe Thickness | 5 mm |
Country of Origin | Made in India |
Robust, fast and simple to operate, our THORSON CNC bending machines use the most Modern technology to offer limitless bending freedom. Highly flexible, powerful and their very short setting-up-times,extremely fast. For radii down to less than 1.5 D and, depending on your needs, fully or partially electrically driven. That is technology to meet that most exacting requirements.
The 3-axis-controlled tube bending machines with their 3 controlled main axes offer all the advantages of CNC technology and are suitable application with small quantities an optimized price / performance ratio
Features:
- Fully automatic and cost effective CNC Tube Benders
- Color Touch Screen, HMI for Data Entry and Editing
- Operation Mode Manual &Auto
- Save up to 50 nos. of program
- Feeding - Electric Servo
- Rotation - Electric Servo
- Fully Automatic Cost Effective CNC Tube Bender
- Color touchscreen HMI for data entry and editing
- Feeding- electic servo
- Rotation - Electric Servo
- All Electrical Parts are Form schneider only.
Double Head Pipe Bending Machine
Product Brochure
Max Capacity (Dia X Thickness) | 1 inch x 3 mm |
Capacity | 100 kg/hr |
Automation Grade | Automatic |
Max Bend Radius | 150 mm |
Material | Mild Steel |
Brand | Thorson |
Bending Direction | Clockwise |
Bend Angle | 120 degree |
Voltage | 415 V |
Power Source | Electric |
Phase | Three Phase |
Frequency | 50 Hz |
Layout | Horizontal |
Country of Origin | Made in India |
Other Details:
- Quick tool change over
- Low maintenance
- Bending spacial profile sections is also easy for profiles such as : angle leg-in &leg-out, bars on-edge & on-flat, round and square bars, H&I beams, and many others
- Best machine for maximum accuracy and repeatability
- ANTI-TWIST DEVICE FOR ABGLE "LEG-IN". It helps in eliminating deformation when rolling angle iron leg-in application, allowing the operator to correct material deflection and achieve perfectly smooth bends. The device mounts on side pressure rolls supplied as standard with the machine
- Tie bar accessorized it increases shaft rigidity to ensure radius repeatability and accuracy, recommended for high well thickness and heavy duty profiles
- Roll set in nylon for tubes in aluminium, stainless steel and other light alloys
- Model with manual screw pressure
Features:
- Impeccable functionality
- Commendable strength
- Superior service life.
- Bottom two rollers are driven
Benifits:
- Universal Die Set
- Strong Structure - Pipe Frame
- All Major Parts - with Harden
- Bearing used - No Bushing
- Fully Designed Product
1 Inch Gear Motor Base Pipe Bending Machine
Product Brochure
Automation Grade | Automatic |
Pipe Diameter | 1 inch |
Bending Direction | Clockwise |
Bending Speed | 4 RPM Approx |
Voltage | 415 V |
Pipe Wall Thickness | 3.5 mm |
Pipe Material | MS And SS |
Brand | Thorson |
Usage/Application | Industrial |
Frequency | 50 Hz |
Material | Mild Steel |
Power | Electric |
Bending Accuracy | 1.5 % |
Gear Box Make | Tirex |
Phase | Thickness |
Max Bending Angle | 180 Degree |
All Major Parts | Made from EN8 Material with Harden |
Country of Origin | Made in India |
Other Details:
- Limit switch for angle setting
mandrel system is available
Linear abd Rotation motion system attachment is applicable - Minimum bending radius is 2 D is possible with mandrel system
- Mandrel System Charges Extra (Depends upon customer requirement)
Features:
- Longer functional life
- Impeccable strength
- Smooth performance
Application Areas:
- Office And House Furniture Industry for Chairs, Tables, Trolleys, Center Tables, Dining Tables, Dining chairs, Designer Beds, etc. School Furniture.
- Hospital Furniture Industry for Cots, Trolleys.
- Health Care Equipments For Gyms.
- Aids For Physically Handicapped.
- Children Play Equipments for Bungalows.
- Automobile Industry for Handle Bars, Chassis, Bumpers, Exhaust Pipes, Silencers, Two Wheeler Accessories.
- Heat Exchanger Tubes, Boiler Tubes etc.
- Front Decorative Bumpers for Cars, Vans Other Commercial Vehicles.
- Machine Tool Building for Air, Water and Hydraulic Pipe lines.
Benifits:
- Strong Structure- Pipe Frame
- All Major Parts - with Hardening
- We use Bearings instead of Bushings
- Break Motor use
- Fully Designed Product
CNC Hydraulic Pipe Bending Machine
Product Brochure
Max Capacity (Dia X Thickness) | 50 mm X 5 mm |
Automation Grade | Automatic |
Material | Mild Steel, Steel |
Min Capacity (Diameter) | 10 |
Max Bend Radius | 150 mm |
Type | Hydraulic |
Operation Mode | Automatic |
Pipe Diameter | 10 to 50 mm |
Layout | Horizontal |
Motor Power | 7.5 HP |
Bending Direction | Clockwise |
Bend Angle | 180 Degree |
Power Source | Hydraulic |
Phase | Three Phase |
Frequency | 50 Hz |
Voltage | 415 V |
Brand | Thorson |
Country of Origin | Made in India |
Features:
- Angle accuracy through encoding system
- Economical model for fine accurate job
- These machines are very compact and robust in design
- Color touch screen, HMI for data entry and editing
- Save up to 50 program with 8 bend /program
Applications:
- Furniture applications
- Two wheeler accessories
- Decorative items
- Automotive seat frames
- Crash guards
- Hydraulic Piping
- Chemical and Process
- Tubes and Heat exchanger
- Concentric tubes
4 Inch Hydraulic Three Roller Pipe Bending Machine
Product Brochure
Usage/Application | Industrial |
Min Capacity (Diameter) | 4 inch |
Max Bend Radius | 150 mm |
Operation Mode | Semi-Automatic |
Bend Angle | 180 Degree C |
Brand | Thorson |
Power | Hydraulic |
Frequency | 50 Hz |
Material | Mild Steel |
Phase | Three Phase |
Voltage | 220 V |
Pipe Thickness | 5 mm |
Country of Origin | Made in India |
Section Pipe Bending Machine
Product Brochure
Operation Mode | Semi-Automatic |
Min Capacity (Diameter) | 20 mm |
Max Bend Radius | 350 mm |
Pipe Diameter | 4 inch |
Power | Electric |
Frequency | 50 Hz |
Material | Mild Steel |
Phase | Three Phase |
Usage/Application | Industrial |
Voltage | 220 V |
Motor Power | 7.5 HP |
Bending Direction | Reverse |
Bend Angle | 180 Degree C |
Pipe Wall Thickness | 3.5 mm |
Pipe Material | MS And SS |
Country of Origin | Made in India |
Other Details:
- Quick tool change over
- Low maintenance
- Bending spacial profile sections is also easy for profiles such as : angle leg-in &leg-out, bars on-edge & on-flat, round and square bars, H&I beams, and many others
- Best machine for maximum accuracy and repeatability
- ANTI-TWIST DEVICE FOR ABGLE "LEG-IN". It helps in eliminating deformation when rolling angle iron leg-in application, allowing the operator to correct material deflection and achieve perfectly smooth bends. The device mounts on side pressure rolls supplied as standard with the machine
- Tie bar accessorized it increases shaft rigidity to ensure radius repeatability and accuracy, recommended for high well thickness and heavy duty profiles
- Roll set in nylon for tubes in aluminium, stainless steel and other light alloys
- Model with manual screw pressure
Features:
- Impeccable functionality
- Commendable strength
- Superior service life.
- Bottom two rollers are driven
Benifits:
- Universal Die Set
- Strong Structure - Pipe Frame
- All Major Parts - with Harden
- Bearing used - No Bushing
- Fully Designed Product
Bar Bending Machine
Product Brochure
Max Bending Radius | 250 mm |
Max Bending Angle | 360 Degree |
Power Source | Electric |
Material | M.S, S.S, Copper, Aluminum, Brass etc. |
Voltage | 415 Volts |
Frequency | 50 Hz |
Phase | Three Phase |
Automation Grade | Semi-Automatic |
Brand | Thorson |
Bar Size | 3.5 inch |
Country of Origin | Made in India |
2 Inch Three Roller Pipe Bending Machine
Product Brochure
Automation Grade | Semi-automatic |
Min Capacity (Diameter) | 2 inch |
Max Bend Radius | 150 mm |
Bend Angle | 180 Degree C |
Voltage | 220 V |
Brand | Thorson |
Usage/Application | Industrial |
Frequency | 50 Hz |
Forward Reverse Switch | Yes |
Structure Material | MS |
Control Panel | Forward and Reverse Switch |
Pipe Thickness | 3 mm |
Top Roller Up And Down | Manually Screw Type |
Country of Origin | Made in India |
Other Details:
- Quick tool change over
- Low maintenance
- Bending spacial profile sections is also easy for profiles such as : angle leg-in &leg-out, bars on-edge & on-flat, round and square bars, H&I beams, and many others
- Best machine for maximum accuracy and repeatability
- ANTI-TWIST DEVICE FOR ABGLE "LEG-IN". It helps in eliminating deformation when rolling angle iron leg-in application, allowing the operator to correct material deflection and achieve perfectly smooth bends. The device mounts on side pressure rolls supplied as standard with the machine
- Tie bar accessorized it increases shaft rigidity to ensure radius repeatability and accuracy, recommended for high well thickness and heavy duty profiles
- Roll set in nylon for tubes in aluminium, stainless steel and other light alloys
- Model with manual screw pressure
Features:
- Impeccable functionality
- Commendable strength
- Superior service life.
- Bottom two rollers are driven
Benifits:
- Universal Die Set
- Strong Structure - Pipe Frame
- All Major Parts - with Harden
- Bearing used - No Bushing
- Fully Designed Product
1.5 Inch Gear Motor Base Pipe Bending Machine
Product Brochure
Automation Grade | Automatic |
Pipe Diameter | 1.5 inch |
Max Bending Radius | 200 mm |
Voltage | 415 V |
Brand | Thorson |
Usage/Application | Industrial |
Frequency | 50 Hz |
Material | Mild Steel |
Power | Electric |
Maximum Bending Angle | 180 Degree |
Pipe Thickness | 3.5 mm |
Overall Dimension | 900 x 950 x 700 mm (H x L x W) |
Bend Direction | Clockwise |
Phase | Three Phase |
Country of Origin | Made in India |
Features:
- Cost effective and alternative to CNC bending
- High volume production machine avoiding manual power
- Produces wrinkle free, clean, repetitive bends
- Interchangeable set of tooling for each type of bend
- Operates at minimum working pressure for trouble free operation
- All wear parts suitably hardened
- Limit switch for angle setting
- Mandrel system is available
- Linear and rotation motion system attachment is applicable
- Programmable bending angle and preset
- Bending sequence memory capacity of 5 programs with 8 bend/program
- Minimum bending radius 1.5 D is possible with mandrel system
8 Inch Three Roller OR Section Bending Machine
Product Brochure
Usage/Application | Industrial |
Brand | Thorson |
Max Bending Radius | 250 mm |
Bending Material | Mild Steel And SS |
Automation Grade | Semi Automatic |
Frequency | 50 Hz |
Hydraulic | Yes |
Phase | 3 Phase |
Power Source | Electric |
Voltage | 415 V |
Maximum Bending Angle | 360 Degree |
Pipe Size | 8 inch |
Pipe Thickness | 7 mm |
Country of Origin | Made in India |
1.5 Inch Three Roller Pipe Bending Machine
Product Brochure
Automation Grade | Semi-automatic |
Min Capacity (Diameter) | 1.5 inch |
Max Bend Radius | 150 mm |
Power | Electric |
Model Name/Number | ATRPBM |
Bend Angle | 180 Degree C |
Voltage | 220 V |
Brand | Thorson |
Usage/Application | Industrial |
Frequency | 50 Hz |
Motorized Gear Box | Make Tirex |
Structure Material | Mild Steel |
Bend Direction | Clockwise & Anticlockwise |
Pipe Thickness | 2 mm |
All Gear, Die & Shaft Parts | Made From EN8 Material With Harden |
Phase | Three Phase |
Country of Origin | Made in India |
In addition, the offered range is marked at the best rate possible:
- Quick tool change over
- Low maintenance
- Bending spacial profile sections is also easy for profiles such as : angle leg-in &leg-out, bars on-edge & on-flat, round and square bars, H&I beams, and many others
- Best machine for maximum accuracy and repeatability
- ANTI-TWIST DEVICE FOR ABGLE "LEG-IN". It helps in eliminating deformation when rolling angle iron leg-in application, allowing the operator to correct material deflection and achieve perfectly smooth bends. The device mounts on side pressure rolls supplied as standard with the machine
- Tie bar accessorized it increases shaft rigidity to ensure radius repeatability and accuracy, recommended for high well thickness and heavy duty profiles
- Roll set in nylon for tubes in aluminium, stainless steel and other light alloys
- Model with manual screw pressure
Features:
- Impeccable functionality
- Commendable strength
- Superior service life.
- All three rollers are driven
Benifits:
- Universal Die Set
- Strong Structure - Pipe Frame
- All Major Parts - with Harden
- Bearing used - No Bushing
- Fully Designed Product
2.5 INCH PREMIUM SEMI AUTOMATIC PIPE BENDING MACHINE
Product Brochure
Max Capacity (Dia X Thickness) | More Than 50 mm X 5 mm |
Pipe Material | Steel |
Min Capacity (Diameter) | 12 mm |
Production Rate (90 deg Bends / hr) | 200 |
Type | Hydraulic |
Operation Mode | Semi-Automatic |
Pipe Diameter | 12 to 50 |
Layout | Horizontal |
Motor Power | 7.5 HP |
Bending Direction | Clockwise |
Bend Angle | 180 Degree |
Round | 12 to 63 mm |
Bending Speed | 180/10 sec |
Voltage | 415 V |
Pipe Wall Thickness | 1.2 to 5 mm |
Frequency | 50Hz |
Power | Hydraulic |
I Deal In | New Only |
One Universal Die Set | Yes |
User Manual | Yes |
Country of Origin | Made in India |
Special Products for Tube Industries:
- Market demand for better quality finish has forced both the tube producers and equipment suppliers to look for better way of Annealing stainless steel tube Induction Heating is now accepted technology for any high speed processing line or lines requiring compact heating combined with rapid response. Examples of this technology adoption is seam and full body annealing of Stainless steel tube, Carbon steel tube, temper lines of pipes, steel bar & wire copper tube annealing, steel strip coating both metallic and organic. All of these areas have one common denominator – they are continuous and is the use of high speed induction heating technology that has made this possible.
In Line & Off Line Annealing for S.S & Copper Tube:
- Austenite stainless steel is not hardenable but like most metal suffers from work hardening both during the manufacture of the tube and during later processes. Annealing which is referred to as solution heat treatment not only recrystallises the structure but dissolves carbide back into the austenite. Annealing temperature range from 1040 to 1150C although temperature can be altered according to the time at temperature and with Induction heating this can be closely controlled. Special features of In line & Off line Induction Tube Annealing as follow.
- Special Water or Air Quenching arrangement as per customer meet
- Automatic Data Saving or Data Logger print out system
- Close loop temperature control system with non contact type temp. pyrometer
- Special heating work coil
- Matching transformer & tank capacitor box
- High frequency solid state IGBT base power unit
3 Inch Hydraulic All Three Roller Pipe Bending Machine
Product Brochure
Max Capacity (Dia X Thickness) | More Than 50 mm X 5 mm |
Pipe Material | Steel |
Min Capacity (Diameter) | 12 mm |
Type | Hydraulic |
Pipe Diameter | 12 to 75 mm |
Power | Hydraulic |
Layout | Vertical |
Bending Direction | Clockwise |
Pipe Size | Round : 12 to 75 mm , Square : 12 x 12 mm to 60 x 60 mm |
Place Of Origin | India |
I Deal In | New Only |
One Universal Die Set | Yes |
User Manual | Yes |
Forward Reverse Switch | Yes |
Country of Origin | Made in India |
Special Products for Tube Industries:
- Market demand for better quality finish has forced both the tube producers and equipment suppliers to look for better way of Annealing stainless steel tube Induction Heating is now accepted technology for any high speed processing line or lines requiring compact heating combined with rapid response. Examples of this technology adoption is seam and full body annealing of Stainless steel tube, Carbon steel tube, temper lines of pipes, steel bar & wire copper tube annealing, steel strip coating both metallic and organic. All of these areas have one common denominator – they are continuous and is the use of high speed induction heating technology that has made this possible.
In Line & Off Line Annealing for S.S & Copper Tube:
- Austenite stainless steel is not hardenable but like most metal suffers from work hardening both during the manufacture of the tube and during later processes. Annealing which is referred to as solution heat treatment not only recrystallises the structure but dissolves carbide back into the austenite. Annealing temperature range from 1040 to 1150C although temperature can be altered according to the time at temperature and with Induction heating this can be closely controlled. Special features of In line & Off line Induction Tube Annealing as follow.
- Special Water or Air Quenching arrangement as per customer meet
- Automatic Data Saving or Data Logger print out system
- Close loop temperature control system with non contact type temp. pyrometer
- Special heating work coil
- Matching transformer & tank capacitor box
- High frequency solid state IGBT base power unit
2 Inch Basic Semi Automatic Pipe Bending Machine For Hose Bending Application
Product Brochure
Max Capacity (Dia X Thickness) | 50 mm X 5 mm |
Pipe Material | Steel |
Min Capacity (Diameter) | 12 mm |
Max Bend Radius | 200 |
Type | Hydraulic |
Operation Mode | Semi-Automatic |
Pipe Diameter | 12 to 50 mm |
Layout | Horizontal |
Motor Power | 5 HP |
Bending Direction | Clockwise |
Bend Angle | 180 Degree |
Bending Speed | 180/10 sec |
Voltage | 415 V |
Pipe Wall Thickness | 1.2 to 5 mm |
Usage/Application | Industrial |
Frequency | 50 HZ |
Power | Hydraulic |
I Deal In | New Only |
One Universal Die Set | Yes |
User Manual | Yes |
Country of Origin | Made in India |
Special Products for Tube Industries:
- Market demand for better quality finish has forced both the tube producers and equipment suppliers to look for better way of Annealing stainless steel tube Induction Heating is now accepted technology for any high speed processing line or lines requiring compact heating combined with rapid response. Examples of this technology adoption is seam and full body annealing of Stainless steel tube, Carbon steel tube, temper lines of pipes, steel bar & wire copper tube annealing, steel strip coating both metallic and organic. All of these areas have one common denominator – they are continuous and is the use of high speed induction heating technology that has made this possible.
In Line & Off Line Annealing for S.S & Copper Tube:
- Austenite stainless steel is not hardenable but like most metal suffers from work hardening both during the manufacture of the tube and during later processes. Annealing which is referred to as solution heat treatment not only recrystallises the structure but dissolves carbide back into the austenite. Annealing temperature range from 1040 to 1150C although temperature can be altered according to the time at temperature and with Induction heating this can be closely controlled. Special features of In line & Off line Induction Tube Annealing as follow.
- Special Water or Air Quenching arrangement as per customer meet
- Automatic Data Saving or Data Logger print out system
- Close loop temperature control system with non contact type temp. pyrometer
- Special heating work coil
- Matching transformer & tank capacitor box
- High frequency solid state IGBT base power unit
PLC Base Steel Pipe Bending Machine
Product Brochure
Material | Mild Steel |
Capacity | 120 kg/hr |
Automation Grade | Semi-automatic |
Pipe Diameter | 2.5 inch |
Motor Power | 5 HP |
Brand | Thorson |
Voltage | 415 V |
Usage/Application | Industrial |
Frequency | 50 Hz |
Power | Electric |
Bend Radius | 200 mm |
Phase | Three Phase |
Country of Origin | Made in India |
Features:
- Impeccable functionality
- Easy operations
- Longer service life
Additional Information:
- Item Code: PLC-03
Single Cylinder Hydraulic Pipe Bending Machine
Product Brochure
Automation Grade | Semi-automatic |
Power | Hydraulic |
Layout | Horizontal |
Pipe Size | 3 inch |
Voltage | 415 V |
Frequency | 50 Hz |
Pipe Material | M.S |
Maximum Bending Angle | 180 Degree |
Bending Radius | 250 mm |
Pipe Bending By | Hydraulic Cylinder |
Pipe Thickness | 6 mm |
Structure Material | Mild Steel |
Bend Direction | Clockwise |
Phase | Three Phase |
Control Panel | Contractor type Limit Switch system |
Country of Origin | Made in India |
Benifits:
- Strong Structure - Pipe Frame
- All Major Parts - with Harden
- Bearing used - No Bushing
- Fully Designed Product
- With PLC
2.5 Inch Gear Motor Base Pipe Bending Machine
Product Brochure
Automation Grade | Automatic |
Material | Mild Steel |
Pipe Diameter | 2.5 inch |
Bending Direction | Clockwise |
Brand | Thorson |
Voltage | 415 V |
Usage/Application | Industrial |
Frequency | 50 Hz |
Power | Electric |
Pipe Material | MS And SS |
Bending Accuracy | 1.5 % |
Phase | Three Phase |
Max Bending Angle | 180 Degree |
Minimum Bending Radius | 200 mm |
Gear Box | Tirex |
Country of Origin | Made in India |
Features:
- Commendable performance
- Longer functional life
- Resistance to corrosion
Application Areas of Tube Pipe Bending Machine:
- Office And House Furniture Industry for Chairs, Tables, Trolleys, Center Tables, Dining Tables, Dining chairs, Designer Beds, etc. School Furniture.
- Hospital Furniture Industry for Cots, Trolleys.
- Health Care Equipments For Gyms.
- Aids For Physically Handicapped.
- Children Play Equipments for Bungalows.
- Automobile Industry for Handle Bars, Chassis, Bumpers, Exhaust Pipes, Silencers, Two Wheeler Accessories.
- Heat Exchanger Tubes, Boiler Tubes etc.
- Front Decorative Bumpers for Cars, Vans Other Commercial Vehicles.
- Machine Tool Building for Air, Water and Hydraulic Pipe lines.
Benifits:
- Strong Structure- Pipe Frame
- All Major Parts - with Hardening
- We use Bearings instead of Bushings
- Break Motor use
- Fully Designed Product
6 Inch Three Roller OR Section Bending Machine
Product Brochure
Usage/Application | Industrial |
Brand | Thorson |
Machine Type | Pipe Bending machine |
Automation Grade | Semi-automatic |
Max Bend Radius | 150 mm |
Pipe Diameter | 6 inch |
Frequency | 50 Hz |
Power Source | Electric |
Voltage | 220 V |
Pipe Thickness | 6.5 mm |
Country of Origin | Made in India |
3 Inch Three Roller Pipe Bending Machine
Product Brochure
Automation Grade | Semi-automatic |
Min Capacity (Diameter) | 3 inch |
Max Bend Radius | 150 mm |
Bend Angle | 180 Degree C |
Voltage | 220 V |
Brand | Thorson |
Usage/Application | Industrial |
Frequency | 50 Hz |
Power | Electric |
Pipe Thickness | 3.5 mm |
Structure Material | Mild Steel |
Bend Direction | Clockwise & Anti clockwise |
Country of Origin | Made in India |
In pursuit of standardizing its quality, the offered 3 inch Three Roller Bending Machine is manufactured in accordance with the set industry norms and guidelines. The finest raw materials and modern machines applied in its making, enable the product to offer superior performance, longer functional life and commendable strength. In addition, the offered range is marked at the best rate possible.
Features:
- Quick tool change over
- Low maintenance
- Bending spacial profile sections is also easy for profiles such as : angle leg-in &leg-out, bars on-edge & on-flat, round and square bars, H&I beams, and many others
- Best machine for maximum accuracy and repeatability
- Anti-Twist Device For Abgle "LEG-IN". It helps in eliminating deformation when rolling angle iron leg-in application, allowing the operator to correct material deflection and achieve perfectly smooth bends. The device mounts on side pressure rolls supplied as standard with the machine
- Tie bar accessorized it increases shaft rigidity to ensure radius repeatability and accuracy, recommended for high well thickness and heavy duty profiles
- Roll set in nylon for tubes in aluminium, stainless steel and other light alloys
- Model with manual screw pressure
- Impeccable functionality
- Commendable strength
- Superior service life
- Bottom two rollers are driven
- We have Different 4 catagories in this models, With heaviest structure and with gauranted result.
Benifits:
- Universal Die Set
- Strong Structure - Pipe Frame
- All Major Parts - with Harden
- Bearing used - No Bushing
- Fully Designed Product
Additional Information:
- Item Code: 3InchSTRPBM
- Delivery Time: 3-4 weeks
Angle Bending Machine
Minimum Order Quantity: 1 Piece
Product Brochure
Capacity | 10mm |
Automation Grade | Automatic |
Usage/Application | Industrial |
Max Bending Radius | 200 mm |
Motor Power | 10 kW |
Frequency | 50 Hz |
Voltage | 240 V |
Country of Origin | Made in India |
5 Inch Hydraulic Three Roller Pipe Bending Machine
Product Brochure
Material | Mild Steel |
Automation Grade | Semi-Automatic |
Brand | Thorson |
Phase | 3 Phase |
Voltage | 220 V |
Usage/Application | Industrial |
Bending Material | Stainless Steel |
Frequency | 50 Hz |
Power Source | Hydraulic |
Surface Finished | Color Coated |
Bend Angle | 180 Degree C |
Pipe Thickness | 5.5 mm |
Max Bend Radius | 150 mm |
Min Capacity (Diameter) | 5 inch |
Country of Origin | Made in India |
Single Cylinder Hydraulic Pipe Bending Machine
Product Brochure
Brand | Thorson |
Model | SCHPBM |
Bending Direction | Clockwise |
Pipe Size | 12 - 75 mm |
Power | Hydraulic |
Machine Pricing | 200000 to 750000 Rs./Unit Rate |
Thickness | 1.5 - 3 mm |
U Bend Size | 2D - 200 mm |
Motor | 5 HP |
Motor Make | ABB |
Hydraulic Valve | Yuken or Polyhydron |
Benifits:
- Strong Structure - Pipe Frame
- All Major Parts - With Harden
- Bearing used - No Bushing
- Fully Designed Product
Additional Information:
- Item Code: SCHPBM
electrical Gear Motor Based pipe bending machine
Product Brochure
Max Capacity (Dia X Thickness) | 50 mm X 5 mm |
Pipe Material | Steel |
Min Capacity (Diameter) | 10 mm |
Max Bend Radius | 200 mm |
Type | Electric |
Operation Mode | Manual |
Pipe Diameter | 12 to 50 mm |
Layout | Horizontal |
Motor Power | 3 HP |
Bending Direction | Clockwise |
I Deal In | New Only |
One Universal Die Set | Yes |
User Manual | Yes |
Forward Reverse Switch | Yes |
Country of Origin | Made in India |
Cnc Pipe Bending Machine
Product Brochure
Automation Grade | Automatic |
Operation Mode | Automatic |
Pipe Size | All |
Usage/Application | Industrial |
Country of Origin | Made in India |
auto pipe bending machine
Product Brochure
crc pipe bending machine
Product Brochure
Exhaust Pipe Bending Machine
Product Brochure